EXPOBAR EB-61 LEVER Espresso Machine pre owned

Description

Due to eBay's over-generous return policy, I am not allowed to say that it works, even if it does, because then parts swapping scammers and people with buyers remorse can return it for a refund. So because of that, it is listed for parts or repair.
Expobar EB-61 Lever Semi-Automatic Commercial Espresso Machine
Pre-Owned.  Worked great the last time I used the machine. Installed a New pump 4. months ago.
115V ac
Includes machine, water holder, single and dual shot filters, heavy Duty filter holder, heavy coffee grinds tamper
New Video showing EB-61 Lever operating: https://youtu.be/KoW5HXa_7mI
The Expobar EB-61Lever is a prosumer-grade espresso machine with a heat-exchange boiler. Expobar’s barista-focused attention to detail is readily apparent in the Lever’s traditional design elements and professional components such as the E61 group and adjustable brew pressure.
The Expobar EB-61 Lever is a compact, traditional-style heat-exchanger machine with commercial levels of strength. The EB-61 Lever is a step up from the other  machines, with its all-over use of stainless steel, as opposed to a combination plastic-stainless look, and the addition of pressure gauges. As a heat-exchanger, the EB-61 Lever is capable of simultaneous brewing and steaming through Expobar’s reimagined E61 group head, which uses a thermosyphon throughout the brew circuit to ensure temperature stability, and an integrated concave pre-infusion chamber for evenly saturated extractions. We’re particularly fond of the brew pressure and boiler pressure gauges, which allow you to monitor each while pulling shots. Internally, the machines are made up of high-quality components, switches and controls, most notably the electronic boiler refill control, which acts as a brain of sorts, refilling the boiler each time it nears empty.
Upon flicking the switch, the boiler will heat up to brew temp, as designated by both the indicator light and the pressure gauge reaching 1 bar. Raising the brew lever controls a valve in the brew group: up activates the pump and opens the valve to allow water to flow through the grounds; down opens a valve that relieves the water pressure from the coffee. The Expobar  EB-61 Lever is compact, and perfect for the serious home, office or small cafe barista.
Boiler Pressure Controller & Gauges
This controller automatically senses drops in pressure within the boiler and kicks the heating element on, which is visually represented on the pressure gauges. These gauges also make it easier to tell when the Office Lever is up to temp and to monitor extraction parameters during brewing.
Manually Adjustable Brew Pressure
For the explorative baristas, the Office Lever offers the ability to easily change its brew pressure by adjusting the OPV, or over pressure valve. This allows the user to experiment with various pressures on the hunt for that elusive perfect shot.
E-61 Group Head
A standard E-61 group constantly syphons water from the boiler to the group and back, but Expobar raised the bar by adding a pre-infusion chamber located above the shower screen. This innovative addition evenly distributes hot water over the grounds for a uniform saturation during pre-infusion and throughout the brewing process.
Heat-Exchange Boiler
The 1.7 L heat-exchanger boiler has an internal chamber that houses the brew water, while the steam is cordoned to the surrounding chamber, preventing them from coming into contact. This design heats the brew water and allows for simultaneous brewing and steaming.
Extraction
The Expobar’s E61 groupheads are designed with a patent design, a modification in its shower screen to allow approximately 7 seconds of preinfusion every time.
This results in slightly more uniform shots.
It’s designed to run slightly hotter, accustom to heavy dosing preference, particularly fancied by American/Australian style baristas.
Such as overdosing to 20 grams per extraction, the hotter temperature bring about more energy to extract the thicker dose.
The thermosyphon system will cycle hot water to the grouphead just like any E61 system.
Usability
It is attached to a single tip steam wand, to allow more time for frothing, very handy for amateurs.
Since it is running on a heat exchanger system, users can froth milk and brew coffee at the same time.
Copper boiler.
A safe material with natural anti-microbial properties to continuously kill greater than 99.9% of bacteria that cause hospital-acquired infections, keeping water in the boiler always potable. One of the most conductive metal on earth, making the machine very efficient in starting up and recovering from lost heat. Will never rust like Stainless Steel, or release lead from Brass, will only oxidise and increase its antimicrobial properties as its age.
Commercial features
For users who wish for more additional features, they will be pleased with what Expobar EB-61 lever offers.
The drip tray is huge, which is always useful to collect more drips before emptying.
Not only that, user can drill a hole through the drip tray and connect to a drainage system to collect endless amount of drips.
THE POSITIVES
USES AN E61 TYPE GROUP – PARTS EASY TO REPLACE
USES THE SAME PARTS AS MORE EXPENSIVE MACHINES DO
TEMPERATURE STABILITY COMPARES WELL WITH OTHER MACHINES
MAKES GREAT ESPRESSO WITH BRILLIANT CREMA
LONGEVITY
THE STEAMER IS EXCELLENT
LOTS OF HOT WATER
DESIGN LOOKS BEAUTIFUL AND IS ROBUST TOO
DRIP TRAY IS VERY BIG AND STURDY
BREW ESPRESSO, DRAW STEAM AND USE HOT WATER ALL AT ONCE
WATER AND STEAM WANDS PLEASINGLY DESIGNED AND
PRACTICAL TO OPERATE
EASY LEVER TO SWITCH BETWEEN MAINS WATER AND TANK
OPTION
INSULATED BOILER STAYS HOT LONGER
Specifications.
Grouphead..
Commercial Grade E61 Grouphead
Boiler Type..
Heat Exchanger
Pump type..
Commercial Grade Vibration Pump
Quick Start Up..
No
Quick Steam.
Yes
Operation..
Lever
Indicator Lights..
On, off, heating, low water
Boiler Capacity..
1.5 Litres
Water Tank Capacity..
2.75 Litres
Water Tank Access..
Removable tray
Plumb in connection..
Yes
Pressure Gauge..
Brew
Internal Control..
Internal Pressurestat
Boiler Construction..
Copper
Chassis Construction..
Stainless Steel
Steam/Water Valve Type..
Compression
Low Water Cut Off..
Yes
Low Water Indication..
Light
Heat Resistant Wands..
Heatproof grips
Cup Warmer..
Yes
Number of Portafilter Holders..
2 (Double and Single with baskets)
Place of Production..
Spain
Dimension..
260 x 450 x 380 MM
Net Weight..
24.5 KG
Gross Weight..
26.5 KG
Pre-Owned. Sold as-is with no warranty